SUPER MICRO Computer Clock Radio CSE RACK14U User Manual

CSE-RACK14U  
Mini-Rack Cabinet  
User’s Guide  
Revison 1.0a  
 
Preface  
About this Manual  
This manual is written for professional system integrators, Information Technology  
professionals, service personnel and technicians. It provides information for the  
installation and use of Supermicro's CSE-RACK14U mini-rack cabinet. Installation and  
maintenance should be performed by experienced professionals only.  
Manual Organization  
Chapter 1: Introduction  
The first chapter provides a checklist of the main components included with the  
mini-rack cabinet and describes its main features.  
Chapter 2: System Safety  
You should familiarize yourself with this chapter for a general overview of safety  
precautions that should be followed when installing and servicing the mini-rack cabinet.  
Chapter 3: Setup and Installation  
Refer here for details on setup and installation of the mini-rack cabinet and the installa-  
tion of components into it.  
Chapter 4: Features  
This chapter covers the mini-rack cabinet’s features and their use.  
0-iii  
 
CSE-RACK14U Mini-Rack Cabinet User’s Guide  
Notes  
0-iv  
 
Chapter 1  
1-6 Contacting Supermicro.....................................................................1-3  
Chapter 2  
Chapter 3  
Setup and Installation........................................................................3-1  
3-1 Unpacking the System .....................................................................3-1  
3-2 Choosing a Setup Location .............................................................3-4  
3-3 Component Mounting Considerations ...........................................3-4  
Ambient Operating Temperature.............................................................3-4  
Chapter 4  
Features......................................................................................................4-1  
4-1 Mobility and Stability .........................................................................4-1  
Casters and Brakes ................................................................................4-1  
Supporting Stands...................................................................................4-2  
4-2 Cabinet Door......................................................................................4-2  
Removing the Door.................................................................................4-2  
Door Lock................................................................................................4-2  
v
 
CSE-RACK14U Mini-Rack Cabinet User’s Guide  
Door Filter (Optional) ..............................................................................4-2  
4-3 Gauge Label Indicators....................................................................4-2  
4-4 Cable Egress Holes..........................................................................4-3  
vi  
 
Chapter 1  
Introduction  
1-1 Overview  
The CSE-RACK14U mini-rack cabinet is optimized for office, small/medium businesses  
(SMB), research and academic institutions and professional studio environments (movie  
animation, music production, and so on). The 14U space of the mini-rack cabinet  
supports any combination of standard EIA 19” rackmount servers or equipment in a  
compact form factor offering ease of maintenance and flexibility for different IT  
applications.  
The CSE-RACK14U mini-rack cabinet's desk-side design features security, mobility and  
options for sound dampening to reduce overall system noise levels. Its sleek and  
compact ID design makes it suitable for customers looking for a variety of IT solutions in  
an office environment.  
1-2 Specifications  
Table 1-1. CSE-RACK14U Mini-Rack Cabinet Specifications  
Specification  
Dimensions  
Description  
21.65 x 37.4 x 30.64 inches / 55 x 95 x 77.92 cm (WxDxH)  
24 x 39.9 x 36.6 inches / 61 x 101.4 x 92.9 cm (WxHxD)  
162.2 lbs / 73 kg (with package)  
136.5 lbs / 62 kg  
Package Dimensions  
Gross Weight  
Net Weight  
Capacity  
14U rack units  
Available Colors  
Black only  
1-3 Product Checklist of Typical Components  
The mini-rack cabinet comes assembled in its own shipping box with all components  
installed.  
An optional part that can be ordered for the mini-rack cabinet includes a mesh filter for  
the mini-rack cabinet front door (P/N: MCP-670-00001-0N).  
1-1  
 
         
CSE-RACK14U Mini-Rack Cabinet User’s Guide  
1-4 Features  
The mini-rack cabinet offers the following features:  
Supports EIA 19" rackmount servers with regular square mounting holes  
Ideal for office environments - 30.64 inches high, same height as regular office  
furniture  
Detachable and lockable front door, which provides extra security for IT facilities and  
ease of maintenance  
Mobility - casters with brakes, easy to move  
Stability - supporting posts on the four corners  
Reusable and environmentally friendly shipping box  
Hexagonal metal mesh air intake design on the front door to maximize airflow  
Rack grounding wire included  
Gauge label indicator on the posts  
Cable egress at bottom of rack for easy cable management  
1-5 Returning Merchandise for Service  
A receipt or copy of your invoice marked with the date of purchase is required before  
any warranty service will be rendered. You can obtain service by calling your vendor for  
a Returned Merchandise Authorization (RMA) number. When returning to the  
manufacturer, the RMA number should be prominently displayed on the outside of the  
shipping carton, and mailed prepaid or hand-carried. Shipping and handling charges will  
be applied for all orders that must be mailed when service is complete.  
For faster service, RMA authorizations may be requested online at:  
Whenever possible, repack the chassis in the original Supermicro carton, using the  
original packaging material. If these are no longer available, be sure to pack the chassis  
securely, using packaging material to surround the chassis so that it does not shift within  
the carton and become damaged during shipping.  
This warranty only covers normal consumer use and does not cover damages incurred  
in shipping or from failure due to the alteration, misuse, abuse or improper maintenance  
of products.  
During the warranty period, contact your distributor first for any product problems.  
1-2  
 
   
Chapter 1: Introduction  
1-6 Contacting Supermicro  
Headquarters  
Address:  
Super Micro Computer, Inc.  
980 Rock Ave.  
San Jose, CA 95131 U.S.A.  
+1 (408) 503-8000  
Tel:  
Fax:  
+1 (408) 503-8008  
[email protected] (General Information)  
[email protected] (Technical Support)  
Email:  
Web Site:  
Europe  
Address:  
Super Micro Computer B.V.  
Het Sterrenbeeld 28, 5215 ML  
‘s-Hertogenbosch, The Netherlands  
+31 (0) 73-6400390  
Tel:  
Fax:  
+31 (0) 73-6416525  
[email protected] (General Information)  
[email protected] (Technical Support)  
[email protected] (Customer Support)  
Email:  
Asia-Pacific  
Address:  
Super Micro Computer, Inc.  
4F, No. 232-1, Liancheng Rd.  
Chung-Ho 235, Taipei County  
Taiwan, R.O.C.  
Tel:  
+886-(2) 8226-3990  
Fax:  
+886-(2) 8226-3991  
Web Site:  
Technical Support:  
Email:  
Tel:  
+886-2-8228-1366, ext. 132 or 139  
1-3  
 
 
CSE-RACK14U Mini-Rack Cabinet User’s Guide  
Notes  
1-4  
 
Chapter 2  
System Safety  
2-1 Electrical Safety Precautions  
Basic electrical safety precautions should be followed to protect yourself and the  
equipment from harm and damage:  
Be aware of the locations of the power on/off switch on the chassis as well as the  
room's emergency power-off switch, disconnection switch or electrical outlet. If an  
electrical accident occurs, you can then quickly remove power from the system.  
Do not work alone when working with high voltage components.  
Power should always be disconnected from the system when removing or installing  
main system components, such as the serverboard, memory modules and floppy  
drive. When disconnecting power, you should first power down the system with the  
operating system first and then unplug the power cords of all the power supply units  
in the system.  
When working around exposed electrical circuits, another person who is familiar  
with the power-off controls should be nearby to switch off the power if necessary.  
Use only one hand when working with powered-on electrical equipment. This is to  
avoid making a complete circuit, which will cause electrical shock. Use extreme  
caution when using metal tools, which can easily damage any electrical components  
or circuit boards with which they come into contact.  
Do not use mats designed to decrease static electrical discharge as protection from  
electrical shock. Instead, use rubber mats that have been specifically designed as  
electrical insulators.  
The power supply power cords must include a grounding plug and must be plugged  
into grounded electrical outlets.  
2-2 General Safety Precautions  
Follow these rules to ensure general safety:  
Keep the area around the rack clean and free of clutter.  
Place the door or any other rack components that have been removed away from  
the system or on a table so that they won't accidentally be stepped on.  
While working on the system, do not wear loose clothing such as neckties and  
unbuttoned shirt sleeves, which can come into contact with electrical circuits or be  
pulled into a cooling fan.  
Remove any jewelry or metal objects from your body, which are excellent metal  
conductors that can create short circuits and harm you if they come into contact with  
printed circuit boards or areas where power is present.  
After accessing the inside of the rack, close the rack door back up and secure the  
rack after ensuring that all connections have been made.  
2-1  
 
       
CSE-RACK14U Mini-Rack Cabinet User’s Guide  
2-3 ESD Peculations  
Electrostatic discharge (ESD) is generated by two objects with different electrical  
charges coming into contact with each other. An electrical discharge is created to  
neutralize this difference, which can damage electronic components and printed circuit  
boards. The following measures are generally sufficient to neutralize this difference  
before contact is made to protect your equipment from ESD:  
Use a grounded wrist strap designed to prevent static discharge.  
Keep all components and printed circuit boards (PCBs) in their antistatic bags until  
ready for use.  
Touch a grounded metal object before removing the board from the antistatic bag.  
Do not let components or PCBs come into contact with your clothing, which may  
retain a charge even if you are wearing a wrist strap.  
Handle a board by its edges only; do not touch its components, peripheral chips,  
memory modules or contacts.  
When handling chips or modules, avoid touching their pins.  
Put the serverboard and peripherals back into their antistatic bags when not in use.  
For grounding purposes, make sure your computer chassis provides excellent  
conductivity between the power supply, the case, the mounting fasteners and the  
serverboard.  
2-4 Rack Precautions  
Make sure to follow the below rack precautions:  
Ensure that the leveling jacks on the bottom of the rack are fully extended to the  
floor with the full weight of the rack resting on them.  
In single rack installation, stabilizers should be attached to the rack. In multiple rack  
installations, the racks should be coupled together.  
Always make sure the rack is stable before extending a component from the rack.  
You should extend only one component at a time - extending two or more  
simultaneously may cause the rack to become unstable.  
2-2  
 
     
Chapter 3  
Setup and Installation  
This section covers setup and installation of the CSE-RACK14U mini-rack cabinet.  
3-1 Unpacking the System  
Follow the steps below to unpack the rack from its shipping container.  
NOTE: The shipping container for the CSE-RACK14U mini-rack cabinet is  
recyclable and reusable.  
Step1: Inspect the Shipping Container  
You should inspect the box the rack was shipped in and note if it was damaged in any  
way.  
Step 2: Remove Securing Straps  
Cut away and remove the securing straps on the outside of the shipping container.  
3-1  
 
     
CSE-RACK14U Mini-Rack Cabinet User’s Guide  
Step 3: Remove Top of Shipping Container  
Remove the top of the shipping container to expose the rack unit.  
Step 4: Remove Shipping Container  
Remove the shipping container from around the rack unit by removing the corner  
supports and lifting the shipping container sides from around the rack unit.  
3-2  
 
Chapter 3: Setup and Installation  
Step 5: Lift Out Rack Unit  
Lift out the rack unit from the shipping container base. Take care not to damage the rack  
unit when removing it from the base.  
WARNING: You need to use two people to lift the rack unit out of the shipping  
container base since its weight (136.5 lbs/62 kg) is greater than one person can  
lift.  
Step 6: Inspect Rack Unit  
Inspect the rack unit to make sure it is free of defects. If the rack itself shows damage  
you should file a damage claim with the carrier who delivered it.  
3-3  
 
CSE-RACK14U Mini-Rack Cabinet User’s Guide  
3-2 Choosing a Setup Location  
Decide on a suitable location for the rack unit. It should be situated in a clean, dust-free  
area that is well ventilated. Avoid areas where heat, electrical noise and electromagnetic  
fields are generated. You will also need it placed near a grounded power outlet. See  
"Rack Precautions" in Chapter 2: "System Safety" on page 2-1 for other safety  
precautions you should follow.  
Leave enough clearance in front of the rack to enable you to open the front door  
completely (~22-inches) and approximately 30 inches of clearance in the back of the  
rack to allow for sufficient airflow and ease in servicing.This product is for installation  
only in a Restricted Access Location (dedicated equipment rooms, service closets  
and the like).  
3-3 Component Mounting Considerations  
Consider the following before mounting components into your CSE-RACK14U mini-rack  
cabinet. Your mini-rack cabinet supports Supports industry standard EIA 19" rackmount  
servers and equipment with regular square mounting holes.  
Please follow the user guides and manuals for your rack components in order to install  
them safely into the mini-rack cabinet.  
Ambient Operating Temperature  
If installed in a closed or multi-unit rack assembly, the ambient operating temperature of  
the rack environment may be greater than the ambient temperature of the room.  
Therefore, consideration should be given to installing the equipment in an environment  
compatible with the manufacturer’s maximum rated ambient temperature (Tmra).  
Reduced Airflow  
Equipment should be mounted into a rack so that the amount of airflow required for safe  
operation is not compromised.  
Mechanical Loading  
Equipment should be mounted into a rack so that a hazardous condition does not arise  
due to uneven mechanical loading.  
Circuit Overloading  
Consideration should be given to the connection of the equipment to the power supply  
circuitry and the effect that any possible overloading of circuits might have on  
over-current protection and power supply wiring. Appropriate consideration of  
equipment nameplate ratings should be used when addressing this concern.  
3-4  
 
           
Chapter 3: Setup and Installation  
Reliable Ground  
A reliable ground must be maintained at all times. To ensure this, the rack itself should  
be grounded. Particular attention should be given to power supply connections other  
than the direct connections to the branch circuit (i.e. the use of power strips, etc.).  
3-5  
 
 
CSE-RACK14U Mini-Rack Cabinet User’s Guide  
Notes  
3-6  
 
Chapter 4  
Features  
This chapter covers features and their uses in the CSE-RACK14U mini-rack cabinet.  
These features are shown below in Figure 4-1.  
Figure 4-1. CSE-RACK14U Mini-Rack Cabinet Features  
4-1 Mobility and Stability  
The CSE-RACK14U mini-rack cabinet is fully mobile with four casters and can be  
stabilized with four support stands.  
Casters and Brakes  
The CSE-RACK14U mini-rack cabinet is fully mobile with four casters. The front two  
casters have brakes, which should be locked down before setting the mini-rack cabinet’s  
support stands or when it is not being moved.  
NOTE: It is recommended that you use two people when moving the cabinet for  
safety considerations.  
4-1  
 
         
CSE-RACK14U Mini-Rack Cabinet User’s Guide  
Supporting Stands  
The mini-rack cabinet has support stands at each corner that can be screwed down to  
support and stabilize the cabinet. Before installing equipment in the mini-rack cabinet,  
be sure to secure it with the support stands first. When moving the cabinet, screw up the  
support stands to free the casters for movement.  
4-2 Cabinet Door  
The CSE-RACK14U mini-rack cabinet comes with removable front and rear doors. The  
door contains a hexagonal screen for air cooling purposes and is secured by a locking  
latch. A rack grounding wire is attached to the door to prevent static discharge when  
touched.  
When equipment is installed and in use in the mini-rack cabinet, make sure this door is  
closed for cooling, safety and security purposes.  
Removing the Door  
The door of the CSE-RACK14U mini-rack cabinet can be removed using the following  
procedure.  
Removing the Cabinet Door  
1. Push the lever in the door hinge to release the door.  
2. Detach the ground wire from the door.  
3. Lift off the door and put it in a secure and safe place while it is disconnected from  
the cabinet.  
Door Lock  
The door of your CSE-RACK14U mini-rack cabinet contains a secure lock for securing  
the cabinet from intrusion.  
Door Filter (Optional)  
An optional door filter is available for the CSE-RACK14U mini-rack cabinet.  
4-3 Gauge Label Indicators  
Gauge label indicators are placed on both internal sides of the cabinet, front and back,  
for measurement and installation of equipment into the cabinet. These assist in proper  
sizing and fitting of industry standard equipment into the rack.  
4-2  
 
           
Chapter 4: Features  
4-4 Cable Egress Holes  
Eight detachable floor holes are placed in the rear of the CSE-RACK14U mini-rack  
cabinet for use in threading cabling or wiring safely through the cabinet to power outlets  
or network ports at the bottom or rear of the cabinet.  
The CSE-RACK14U mini-rack cabinet also comes with four rubber plugs that can be  
used for better cable routing through the cable egress holes.  
An optional cable management kit is also available for the mini-rack cabinet that can be  
mounted on the side panels in its rear side.  
4-3  
 
 
CSE-RACK14U Mini-Rack Cabinet User’s Guide  
Notes  
4-4  
 
Disclaimer  
The products sold by Supermicro are not intended for and will not be used in life support  
systems, medical equipment, nuclear facilities or systems, aircraft, aircraft devices,  
aircraft/emergency communication devices or other critical systems whose failure to  
perform be reasonably expected to result in significant injury or loss of life or  
catastrophic property damage. Accordingly, Supermicro disclaims any and all liability,  
and should buyer use or sell such products for use in such ultra-hazardous applications,  
it does so entirely at its own risk. Furthermore, buyer agrees to fully indemnify, defend  
and hold Supermicro harmless for and against any and all claims, demands, actions,  
litigation, and proceedings of any kind arising out of or related to such ultra-hazardous  
use or sale.  
 
CSE-RACK14U Mini-Rack Cabinet User’s Guide  
 

Sharp Blender EJ 12GDW User Manual
Shure Car Stereo System UA860WB User Manual
Sony Carrying Case LCM FD71 User Manual
Sony Cell Phone XPERIA S User Manual
Sony DVD Player DAV FX80 User Manual
Sony MP3 Player SRF M73 User Manual
Sony Photo Printer DPP EX5 User Manual
Southwing Bluetooth Headset SH440 User Manual
Spin Master Motorized Toy Car Aero Ace User Manual
Tandberg Data Refrigerator FS 1600 User Manual